• Call Us: 0086-21-58386258
  • No.416 Jianye Road, shanghai, View on Map

Culture, charm and heritage

We offer a luxurious base from which to explore the city.

Operate Ultrafine Mill

Operate Ultrafine Mill

Operate the ultrafine mill correctly

First of all, the ultrafine mill is to process the raw materials into materials between 300-3250 mesh, then the milling equipment is a commonly used industrial processing milling equipment, which is irreplaceable in the milling of ore materials. The market value and the different requirements of processed materials, the ultrafine mill is a new type of ore material processing equipment improved on the basis of the traditional mill, and the processing field is constantly expanding to achieve the trend with the times. The effect is also able to meet the needs of customers, so the ultrafine mill has a good development direction, so how can such a superfine mill operate correctly?

The first is the use of ultrafine grinding. There should be fixed personnel responsible for the inspection. The operator must have a certain level of technology. Before the installation of the grinding machine, technical personnel must be trained to understand the principle performance of the milling machine. Familiar with the operation. During the use of ultrafine grinding equipment, there should be fixed personnel responsible for the inspection. The operators must have a certain level of technology. Before the installation of the grinding machine, technical personnel must be trained to understand the principle and performance of the milling machine. Operate procedures. Only the process that is familiar with the operation can make the ultrafine mill better applied to the production process, and at the same time, the machine efficiency is also greatly improved. This is also the reason, and daily maintenance and maintenance should be done.

Before starting the ultrafine grinding machine, check whether there are iron-like debris in the machine, close the door and close the door, adjust the fan and the main engine to turn, and the exhaust valve should be in the fully open position. Check if the bolts and nuts are loose, especially the bolts and nuts in the main machine should be strictly checked. The starting sequence is: first start the analyzer and then start the fan, then start the host. After starting the host, it should be fed immediately (small particles should be added first, now the normal size material is added), then the large air volume valve is opened, and the small exhaust valve is gradually closed. Under the premise of ensuring that the inlet is not sprayed outside, the exhaust valve should be closed as much as possible. Then adjust the fineness of the finished product.

When stopping, stop the feeding for about one minute before stopping the main machine, then stop the fan and finally stop the analyzer. Feeding control: The feeding should be uniform. According to the load of the main machine under different feeding amounts (observe the main current meter), the maximum output is tested. It is forbidden to enter the machine with bolts and other iron blocks. Fineness adjustment: according to materials, soft and hard, water content, specific gravity, processing fineness. The adjustable speed can be adjusted, the speed is high, the fineness is high, and the output will be correspondingly reduced. If the fineness required by the user is not reached, the air volume of the air duct should be controlled, and the user can flexibly grasp.

In summary, the quality of the machine equipment for processing materials is the key to ensuring production efficiency, followed by the demand for powder users, meeting the needs of customers is the key factor that can reflect the value in the equipment industry, and also cater to the country. The policy, while the product technology continues to innovate, so it will not be eliminated, the ultrafine mill models are complete.